Cartola

Essa página está em modo somente de leitura. Você pode visualizar a fonte, mas não alterá-la. Informe-se com o administrador do Wiki, caso você ache que isso está incorreto.
2.9 Committing to the Installation

<code>  The installation can now proceed if desired. This is also the last chance for aborting the installation to prevent changes to the hard drive.
</code>
<code>                       User Confirmation Requested
 Last Chance! Are you SURE you want to continue the installation?
</code>
<code> If you're running this on a disk with data you wish to save then WE
 STRONGLY ENCOURAGE YOU TO MAKE PROPER BACKUPS before proceeding!
</code>
<code> We can take no responsibility for lost disk contents! 
</code>
<code>                             [ Yes ]    No
</code>
<code>  Select [ Yes ] and press Enter to proceed.
</code>
<code>  The installation time will vary according to the distribution chosen, installation media, and the speed of the computer. There will be a series of messages displayed indicating the status.
</code>
<code>  The installation is complete when the following message is displayed:
</code>
<code>                               Message
</code>
<code>Congratulations! You now have FreeBSD installed on your system.
</code>
<code>We will now move on to the final configuration questions.
For any option you do not wish to configure, simply select No.
</code>
<code>If you wish to re-enter this utility after the system is up, you may
do so by typing: /usr/sbin/sysinstall. 
</code>
<code>                                 [ OK ]
</code>
<code>                      [  Press enter or space  ]
</code>
<code>  Press Enter to proceed with post-installation configurations.
</code>
<code>  Selecting [ No ] and pressing Enter will abort the installation so no changes will be made to your system. The following message will appear:
</code>
<code>                                Message
Installation complete with some errors.  You may wish to scroll
through the debugging messages on VTY1 with the scroll-lock feature.
You can also choose "No" at the next prompt and go back into the
installation menus to retry whichever operations have failed.
</code>
<code>                                 [ OK ]
</code>
   This message is generated because nothing was installed. Pressing Enter will return to the Main Installation Menu to exit the installation.